Plate DishSuclain
Suclain 27 Pcs Cake Tier Stacking Kit with 12 Roman Columns | Includes 6 Boards 4.7/6.3/7.9 Inch, 9 Dowel Rods for Wedding Cakes
Is the Suclain Roman-column cake stacking kit the right support set for the tiered cake you’re making?
If you’re building a 6-, 8- and 10-inch tiered cake and want visible pillars between the layers, this Suclain kit is a straightforward place to start. It includes six separator plates, 12 Roman-style columns and nine rods, with two plates in each of its three sizes. The columns give a celebration cake a more formal, raised look; the rods help support the cake rather than relying on the columns alone. For broader cake sizes or more dowels, the KISEER set below is the more flexible pick.
From the Amazon listing
- ✓Package Includes: you will receive 12 pieces of roman column cake pillars in 3 size, 4 pieces in each size, 6 pieces of cake separator plates in 3 size, 2 pieces in each size, and 9 pieces of stick support rods, sufficient to meet your daily using needs
- ✓Size Information: the cake pillar measures approx. 7 cm/ 2.76 inches, approx. 12.5 cm/ 4.92 inches, and approx. 17 cm/ 6.69 inches in height; The cake stand measures approx. 12 cm/ 4.72 inches, approx. 16 cm/ 6.3 inches, and approx. 20 cm/ 7.87 inches in diameter, designed for cakes in size of 6/8/10 inches in diameter; And the cake sticks support rods measure approx. 24 cm/ 9.45 inches, which can be cut into different sizes to use
Do the boards suit the cake sizes you have in mind?
The plates are about 4.72, 6.3 and 7.87 inches across, and the set is intended for 6-, 8- and 10-inch cakes. That makes it an easy match for a classic three-tier size progression. Choose a plate smaller than the cake tier it supports so the board stays hidden; if your plan includes 12- or 14-inch tiers, KISEER has a wider range of plate sizes.
Do you want pillars, dowels, or both?
Here you get both: the Roman columns create a visible gap and decorative effect between tiers, while the rods are the less visible supports within the cake. Pillars add height and a traditional wedding-cake look, but they aren’t a substitute for properly supporting the cake above each board. If you want a more direct stacked look, use dowels to support each tier and skip the visible-column style.
How do you keep a tiered cake level and steady?
Trim supports to the height of the cake tier they’ll sit in, keep them upright, and check that the separator plate rests evenly before adding the next tier. Unevenly cut rods or a plate that rocks are common ways to invite a lean or a sunken layer. Assemble on a flat, firm base, and don’t expect decorative pillars by themselves to stop a cake shifting.
Is this a sensible first kit, and what about transport?
For a first tiered cake, the matched plate sizes and included columns make the parts easier to plan than a pile of loose supports. Set everything out and do a dry fit before the cake is assembled, so you can catch a size mismatch or an uneven board early. For a drive, keep the cake chilled and the box secured on a flat surface; when the design allows, transporting tiers separately and stacking at the venue is the safer plan.
How they compare
Roman columns plus plates for 6-, 8- and 10-inch tiers—made for a classic raised wedding-cake look.
Five plate sizes and a generous supply of support rods and stacking dowels for more cake-size flexibility.
A white multi-tier pillar set for bakers who want a simpler, coordinated look.
Who it suits
This set is for the home baker making a polished 6-, 8- and 10-inch celebration cake who wants visible Roman columns and the basic plates and supports together. I’d choose it for a wedding or family event where that classic pillar look is part of the design.
What you give up
- You’re limited to three plate diameters, so it’s not the best fit for unusually sized tiers or a broader range of future projects.
- The columns create a separated, decorative look rather than the clean, close-stacked finish some cakes call for.
- The nine rods need to be measured and cut to suit your cake; careful fitting still matters for a level, steady result.
When another one is the better buy
KISEER 5 Pieces Cake Separator Plates Stands with 24 Pieces Plastic Cake Dowels for 4 6 8 10 12 Inch Tiered Cakes: Choose KISEER if you want more size flexibility: it includes five plate diameters from 9 to 26 cm, plus 24 support rods and 15 stacking dowels. It’s the better choice for a baker planning different cake sizes or wanting a larger supply of supports.
Angoily 8 Sets Cake Dowels for Tiered Cake Stacking Kit | 8Inch Plastic Cake Separator Plates, White Multi-Tier Cake Pillars: Choose Angoily if you want a white multi-tier pillar set and its 8-inch separator plates suit your plan. It’s a simpler alternative when you don’t need Suclain’s three plate sizes or Roman-column styling.
You will also want
Once the cake is built, a stable serving setup makes the finish easier to handle. I’d add a proper cake server for neat slices and serving at the table.
2-Piece Stainless Steel Pie & Cake Server Set | Small Spatulas for Cookies, Brownies, Cheesecake, Tarts, Pizza, Lasagna, Quiche and more
The stainless-steel cake server gives you a dedicated tool for lifting slices cleanly from a celebration cake.
Serving Utensils Set for Partie, Silver Stainless Steel Metal Serveware Large Serving Spoons, Slotted Spoons, Forks, Tongs, Soup and Skimmer Spoon, Cake Server for Buffet, Catering, Entertaining 15pcs
This larger serving set is useful if the cake is part of a buffet and you also need serving spoons, forks and tongs for the rest of the food.
Questions buyers ask
What cake board sizes come with the Suclain kit?
The six separator plates come in three diameters: about 4.72, 6.3 and 7.87 inches, with two of each. They’re intended for 6-, 8- and 10-inch cake tiers, with the plates smaller than the cakes so they’re less visible.
Can I use this as a three-tier cake stacking kit?
Yes, its three plate sizes correspond to a common 6-, 8- and 10-inch tier arrangement. Plan the support layout for each tier before assembly and make sure each plate sits level on its supports.
How do I use cake dowels safely?
Measure the height of the tier the rods will support, cut the rods to match, and insert them upright and evenly before setting the plate above them. Check that the plate is level and stable before adding another tier. For food-contact safety, use clean supports labeled for food contact and handle them with clean hands.
Are cake pillars more stable than dowels?
They do different jobs: pillars visibly separate and elevate tiers, while dowels support the cake beneath a separator plate.
How do I stop a tiered cake wobbling?
Start with a flat base, cut supports evenly to the tier height, place them upright and space them to support the plate evenly. Check for rocking before stacking the next tier; if you’re driving with the cake, a separate-tier transport plan is usually less stressful.
Can I transport a cake after stacking it?
You can, but a tall stacked cake is vulnerable to bumps, heat and sudden braking. Drive smoothly, avoiding sudden stops and turns.
Is this kit a good choice for a beginner?
It’s a practical starting point if your cake matches the included sizes and you want the decorative pillars as well as support pieces. Do a dry fit first and take time to cut and level the supports; the kit doesn’t remove the need for careful measuring.
Buying guides with this product
More in Wedding & Event Plates
If your tier sizes, preferred finish or support style don’t line up with these kits, browse the other cake supports in the category for a closer match.
